Design of a mm-wave Planar CPW-fed Tapered Dielectric Rod Antenna

mm-wave;antenna;Electrical and Computer Engineering

Sotoodeh, Zahra

University of Waterloo

关键词: mm-wave;    antenna;    Electrical and Computer Engineering;   

Others  :  https://uwspace.uwaterloo.ca/bitstream/10012/6402/1/Sotoodeh_Zahra.pdf

瑞士|英语

来源: UWSPACE Waterloo Institutional Repository

【 摘 要 】

The demand for high data rate transfers in short range areas have been increasing significantly. Millimeter wave communication systems can fulfill the requirements for such applications due to the availability of wide bandwidths at these frequencies. Particularly, 60 GHz frequency band is more appropriate among other mm-wave bands because of the oxygen energy absorption resonance at this frequency.Millimeter wave antennas are one of the desired components in short range wireless communications. High gain and broadband antennas are required for this purpose.In this study, a fully planar 60 GHz antenna is introduced. Tapered dielectric rod antenna is chosen to achieve high radiation efficiency. The antenna is designed on two common substrates with high permittivity: alumina (Al2O3) and high resistive Silicon. Both substrates are very low loss and many designs for front-end components are developed on these substrates due to their high permittivity. In other words, the proposed antenna can be integrated with the front-end platform in the same substrate. In addition, the antenna feeding is the CPW line which makes it a convenient solution for integration of the antenna with RF front-ends such as MMICs or MEMS circuits in this range of frequency.