A Low-Cost and Efficient Microstrip-Fed Air-Substrate-Integrated Waveguide Slot Array

Electronics

Linfeng Li¹  Jie-Bang Yan¹ 

[1] Electrical and Computer Engineering Department, The University of Alabama, Tuscaloosa, AL 35487, USA;

关键词: SIW;    waveguide;    slot array;    mm-wave;    5G;   

DOI  :  10.3390/electronics10030338

来源: DOAJ

【 摘 要 】

A microstrip-fed air-substrate-integrated waveguide (ASIW) slot array with high efficiency and low cost is presented. The design cuts out the substrate material within SIW, replaces the vias with metallic sidewalls, and uses a simple microstrip line-waveguide transition to feed the slot array. Radiating slots are cut on a 5-mil brass-plate, which covers the top of the substrate cutout to resemble a hollow waveguide structure. This implementation provides a simple and efficient antenna array solution for millimeter-wave (mm-wave) applications. Meanwhile, the fabrication is compatible with the standard printed circuit board (PCB) manufacturing process. To demonstrate the concept, a 4-element ASIW slot array working at the n257 band for 5G communications was designed using low-cost Rogers 4350B and FR4 substrate materials. Our simulation result shows 18% more efficiency than a conventional SIW slot array using the same substrate. The fabricated prototype shows |S11| < −15 dB over 27–29 GHz and a peak realized gain of 10.1 dBi at 28.6 GHz. The design procedure, prototyping process, and design analysis are discussed in the paper.

【 授权许可】

Unknown