ART CCIM Phase II-A Off-Gas System Evaluation Test Plan.

Soelberg, N. ; Roach, J.

Technical Information Center Oak Ridge Tennessee

关键词: Radioactive waste processing;    Melters;    Induction;    High level radioactive wastes;    Slurries;   

RP-ID  :  DE2009957552

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

This test plan defines testing to be performed using the Idaho National Laboratory (INL) engineeringscale cold crucible induction melter (CCIM) test system for Phase II-A of the Advanced Remediation Technologies (ART) CCIM Project. The multi-phase ART-CCIM Project is developing data and design information for the evaluation of replacing the joule-heated melter (JHM) used to treat high level waste (HLW) in the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) with a cold crucible induction melter. The INL CCIM test system includes all feed, melter off-gas control, and process control subsystems needed for fully integrated operation and testing. Testing will include operation of the melter system while feeding a non-radioactive slurry mixture prepared to simulate the same type of waste feed presently being processed in the DWPF. Process monitoring and sample collection and analysis will be used to characterize the off-gas composition and properties, and to show the fate of feed constituents, to provide data that shows how the CCIM retrofit conceptual design can operate with the existing DWPF off-gas control system.