Effect of the Environment and Alloy Composition on the Electrochemical Behavior of Ni-Cr-Mo Alloys.

Hayes, J. R. ; Szmodis, A. W. ; Anderson, K. L. ; Orme, C. A.

Technical Information Center Oak Ridge Tennessee

关键词: Environmental effects;    Alloys;    Electrochemistry;    Nickel;    Chromium;   

RP-ID  :  DE200515014472

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

Alloy 22 (UNS N06022) is the candidate material for the corrosion resistant, outer barrier of the Yucca Mountain nuclear waste containers. One of the potential corrosion degradation modes of the container is uniform or passive corrosion. Therefore it is of importance to understand the stability of the oxide film, which will control the passive corrosion rate of Alloy 22. Many variables such as temperature, composition and pH of the electrolyte, applied potential, and microstructure and composition of the base metal would determine the thickness and composition of the oxide film. The purpose of this research work was to use electrochemical and surface analysis techniques to explore the influence of solution pH and applied potential on the characteristics of the oxide film formed on Alloy 22 and two experimental alloys containing differing amounts of chromium (Cr) and molybdenum (Mo). Results confirm that bulk metal composition is fundamental to the passive behavior and potential breakdown of the studied alloys. In these preliminary results, welded and non-welded Alloy 22 did not show differences in their anodic behavior.