Recycle Experience of Dismantled Cask Handling Crane by Surface Removal Sampling at Kori No. 1.

Kim, K. D. ; Baeg, C. Y. ; Son, J. K. ; Kim, H. S. ; Ha, J. H. ; Song, M. J.

Technical Information Center Oak Ridge Tennessee

关键词: Spent fuel casks;    Surface contamination;    Recycling;    Radioactive waste disposal;    Radioactive wastes;   

RP-ID  :  DE2004827907

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

The Kori No.1, which began operation in 1978, replaced its cask handling crane in 2000. To prove the safety of recycling and reuse of crane scrap, a particular calculation method for surface contamination was used. Because surface radioactive contamination of steel is limited to a few-microns-thick layer, we can calculate the total (removable and fixed contamination) activity of the sample conservatively by this surface removal sampling means. If we multiply the ratio of total surface and the area of the selected surface by its activity, total activity of the scrap can be estimated. Conservatively, the sampled portion can be used as a representative sample of the scrap. Both the inner and outer part of the scrap was sampled separately, and gamma spectra were analyzed to check whether activation had occurred. Before sampling, the entire surface of the steel is scan surveyed by several kinds of GM and GP detectors. Contaminated parts were segregated, or decontaminated to the background. Almost one sample per one ton of steel was collected. Gamma spectra of 62 samples were analyzed by 100% efficiency HP Ge detector.