Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants

Baker, Gregory L. ; Ghosh, Ruby N. ; III, D.J. Osborn ; Zhang, Po

Michigan State University

关键词: Luminescence;    On-Line Measurement Systems;    Monitoring;    Oxygen;    Binders;   

DOI  :  10.2172/860322
RP-ID  :  none
RP-ID  :  FC26-02NT41582
RP-ID  :  860322

美国|英语

来源: UNT Digital Library

【 摘 要 】

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Previously we immobilized the potassium salt of a molybdenum cluster, K{sub 2}M{sub 6}Cl{sub 14}, in a sol-gel matrix and showed that the luminescence is stable after 54 hours at 200 C, but the quenching ratios were low and the films delaminated after thermal cycling due to densification of the matrix. Three new approaches to solve decreased quenching over time and delamination of films off fiber tips were investigated. In the first approach K{sub 2}Mo{sub 6}Cl{sub 14} embedded in cured sol-gel particles were incorporated into a TEOS based sol-gel. These gave enhanced quenching (6x), but delaminated. Our second approach was to use a commercial cyanoacrylate glue to immobilize the particles onto the tip of an optical fiber. This gave better adhesion and good quenching initially, but eventually the glue degraded upon heating. Our third approach was to use a 55% OtMOS/ TEOS sol-gel binder. Films based on this new sol-gel binder show high quenching ({approx}6x) and superior mechanical stability even after thermal cycling. Sensor measurements on an optical fiber containing K{sub 2}Mo{sub 6}Cl{sub 14} embedded in cured sol-gel particles were obtained from 100 to 25 C. The signal intensity in nitrogen was stable at 2.8 {+-} 0.2 nW, and the quenching ratio (ratio of signal in N{sub 2} vs. 21 % O{sub 2}) varied from 4.4 to 6.9X. These are promising results for a high temperature fiber optical oxygen sensor based on molybdenum chloride clusters.