DEVELOPMENT OF ODS HEAT EXCHANGER TUBING | |
Mark A. Harper, Ph.D. | |
Huntington Alloys (United States) | |
关键词: Corrosion; Materials Testing; Extrusion; 36 Materials Science; Bending; | |
DOI : 10.2172/813635 RP-ID : NONE RP-ID : FC26-00NT40970 RP-ID : 813635 |
|
美国|英语 | |
来源: UNT Digital Library | |
【 摘 要 】
Work continued on four major tasks of this project--increasing the circumferential strength of MA956 tubing, joining of the MA956 alloy, determining the bending limits of MA956 tubing, and determination of the high temperature corrosion limits of the MA956 alloy. With respect to increasing the circumferential strength of a MA956 tube, an additional 120 MA956 rods have been extruded (total of 180 rods) using 16:1 and 10:1 extrusion ratios and extrusion temperatures of 1000, 1075, 1150, and 1200 C. Also, approximately 40 cold work (0, 10, 20, 30, 40%) plus annealing treatments (1000, 1150, 1300 C) have been completed with the resulting sample microstructures presently being analyzed. Creep testing to determine the ''stress threshold'' curves for this alloy continues. Regarding joining of the MA956 alloy, work continued using friction welding, magnetic impulse welding, explosive welding, and transient liquid phase bonding, with encouraging results obtained from the friction, explosive, and transient liquid phase joining methods. Initial work on determining the bending limits of the MA956 tubing has shown that the recrystallized material shows good ductility but the unrecrystallized material does not. And finally, fluid-side high temperature corrosion testing of the material continues and the environment for the laboratory fireside corrosion testing has been established and testing initiated.
【 预 览 】
Files | Size | Format | View |
---|---|---|---|
813635.pdf | 10807KB | download |