DEVELOPMENT OF ODS HEAT EXCHANGER TUBING

Mark A. Harper, Ph.D.

Huntington Alloys (United States)

关键词: Corrosion;    Testing;    Extrusion;    36 Materials Science;    Bonding;   

DOI  :  10.2172/809165
RP-ID  :  NONE
RP-ID  :  FC26-00NT40970
RP-ID  :  809165

美国|英语

来源: UNT Digital Library

【 摘 要 】

Work has begun under three major tasks of this project. With respect to increasing the circumferential strength of a MA956 tube, approximately 60 MA956 rods have been extruded using a 20:1 extrusion ratio and extrusion temperatures of 1000, 1075, 1150, and 1200 C. Also, creep testing is underway for the purpose of determining the ''stress threshold'' curves for this alloy. Regarding joining of the alloy MA956, work has begun on the friction welding, magnetic impulse welding, explosive welding, and transient liquid phase bonding aspects of this project. And finally, material is being prepared for the laboratory fire-side high temperature corrosion tests, with potential gas and deposits for a typical Vision 21 plant being reviewed for final determination of these variables in the test program.