Experimental Investigations of an Inclined Lap-Type Bolted Joint

Gregory, Danny Lynn ; Resor, Brian R. ; Coleman, Ronald G. ; Smallwood, David Ora

Sandia National Laboratories

关键词: Calibration;    Aerospace Industry;    Energy Losses;    Computerized Simulation;    Response Functions;   

DOI  :  10.2172/810683
RP-ID  :  SAND2003-1193
RP-ID  :  AC04-94AL85000
RP-ID  :  810683

美国|英语

来源: UNT Digital Library

【 摘 要 】

The dynamic response of critical aerospace components is often strongly dependent upon the dynamic behavior of bolted connections that attach the component to the surrounding structure. These bolted connections often provide the only structural load paths to the component. The bolted joint investigated in this report is an inclined lap-type joint with the interface inclined with respect to the line of action of the force acting on the joint. The accurate analytical modeling of these bolted connections is critical to the prediction of the response of the component to normal and high-level shock environmental loadings. In particular, it is necessary to understand and correctly model the energy dissipation (damping) of the bolted joint that is a nonlinear function of the forces acting on the joint. Experiments were designed and performed to isolate the dynamics of a single bolted connection of the component. Steady state sinusoidal and transient experiments were used to derive energy dissipation curves as a function of input force. Multiple assemblies of the bolted connection were also observed to evaluate the variability of the energy dissipation of the connection. These experiments provide insight into the complex behavior of this bolted joint to assist in the postulation and development of reduced order joint models to capture the important physics of the joint including stiffness and damping. The experiments are described and results presented that provide a basis for candidate joint model calibration and comparison.