Laboratory Evaluation of Damage Criteria and Creep Parameters of Tioga Dolomite and Rock Salt from Cavern Well No. 1

Lee, Moo Y. ; Ehgartner, Brian L.

Sandia National Laboratories

关键词: Natural Gas;    Compression;    Salt Deposits;    Elasticity;    Pennsylvania;   

DOI  :  10.2172/808814
RP-ID  :  SAND2001-0918
RP-ID  :  AC04-94AL85000
RP-ID  :  808814

美国|英语

来源: UNT Digital Library

【 摘 要 】

A suite of laboratory triaxial compression and triaxial steady-state creep tests provide quasi-static elastic constants and damage criteria for bedded rock salt and dolomite extracted from Cavern Well No.1 of the Tioga field in northern Pennsylvania. The elastic constants, quasi-static damage criteria, and creep parameters of host rocks provides information for evaluating a proposed cavern field for gas storage near Tioga, Pennsylvania. The Young's modulus of the dolomite was determined to be 6.4 ({+-}1.0) x 10{sup 6} psi, with a Poisson's ratio of 0.26 ({+-}0.04). The elastic Young's modulus was obtained from the slope of the unloading-reloading portion of the stress-strain plots as 7.8 ({+-}0.9) x 10{sup 6} psi. The damage criterion of the dolomite based on the peak load was determined to be J{sub 2}{sup 0.5} (psi) = 3113 + 0.34 I{sub 1} (psi) where I{sub 1} and J{sub 2} are first and second invariants respectively. Using the dilation limit as a threshold level for damage, the damage criterion was conservatively estimated as J{sub 2}{sup 0.5} (psi) = 2614 + 0.30 I{sub 1} (psi). The Young's modulus of the rock salt, which will host the storage cavern, was determined to be 2.4 ({+-}0.65) x 10{sup 6} psi, with a Poisson's ratio of 0.24 ({+-}0.07). The elastic Young's modulus was determined to be 5.0 ({+-}0.46) x 10{sup 6} psi. Unlike the dolomite specimens under triaxial compression, rock salt specimens did not show shear failure with peak axial load. Instead, most specimens showed distinct dilatancy as an indication of internal damage. Based on dilation limit, the damage criterion for the rock salt was estimated as J{sub 2}{sup 0.5} (psi) = 704 + 0.17 I{sub 1} (psi). In order to determine the time dependent deformation of the rock salt, we conducted five triaxial creep tests. The creep deformation of the Tioga rock salt was modeled based on the following three-parameter power law as {var_epsilon}{sub s} = 1.2 x 10{sup -17} {sigma}{sup 4.75} exp(-6161/T), where {var_epsilon}{sub s} is the steady state strain rate in s{sup -1}, {sigma} is the applied axial stress difference in psi, and T is the temperature in Kelvin.