Solar Power Tower Design Basis Document, Revision 0

ZAVOICO,ALEXIS B.

Sandia National Laboratories

关键词: 25 Energy Storage;    Heating;    14 Solar Energy;    Nitrates;    Control Systems;   

DOI  :  10.2172/786629
RP-ID  :  SAND2001-2100
RP-ID  :  AC04-94AL85000
RP-ID  :  786629

美国|英语

来源: UNT Digital Library

【 摘 要 】

This report contains the design basis for a generic molten-salt solar power tower. A solar power tower uses a field of tracking mirrors (heliostats) that redirect sunlight on to a centrally located receiver mounted on top a tower, which absorbs the concentrated sunlight. Molten nitrate salt, pumped from a tank at ground level, absorbs the sunlight, heating it up to 565 C. The heated salt flows back to ground level into another tank where it is stored, then pumped through a steam generator to produce steam and make electricity. This report establishes a set of criteria upon which the next generation of solar power towers will be designed. The report contains detailed criteria for each of the major systems: Collector System, Receiver System, Thermal Storage System, Steam Generator System, Master Control System, and Electric Heat Tracing System. The Electric Power Generation System and Balance of Plant discussions are limited to interface requirements. This design basis builds on the extensive experience gained from the Solar Two project and includes potential design innovations that will improve reliability and lower technical risk. This design basis document is a living document and contains several areas that require trade-studies and design analysis to fully complete the design basis. Project- and site-specific conditions and requirements will also resolve open To Be Determined issues.