Top-of-Rail lubricant

Alzoubi, M. F. ; Fenske, G. R. ; Erck, R. A. ; Boparai, A. S.

Argonne National Laboratory

关键词: Lubricants;    Interfaces;    Railways;    Friction;    32 Energy Conservation, Consumption, And Utilization;   

DOI  :  10.2172/759093
RP-ID  :  ANL/ET/RP-102355
RP-ID  :  W-31109-ENG-38
RP-ID  :  759093

美国|英语

来源: UNT Digital Library

【 摘 要 】

Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.