NIF Periscope Wall Modal Study Comparison of Results for 2 FEA Models with 2 Modal Tests

Eli, M. W. ; Gerhard, M. A. ; Lee, C. L. ; Sommer, S. C. ; Woehrle, T. G.

Lawrence Livermore National Laboratory

关键词: 70 Plasma Physics And Fusion Technology;    Light Sources;    Reinforced Concrete;    Excitation;    36 Materials Science;   

DOI  :  10.2172/15013511
RP-ID  :  UCRL-ID-141276
RP-ID  :  W-7405-ENG-48
RP-ID  :  15013511

美国|英语

来源: UNT Digital Library

【 摘 要 】

This report summarizes experimentally and numerically determined modal properties for one of the reinforced concrete end walls of the NIF Periscope Support Structure in Laser Bay 1. Two methods were used to determine these modal properties: (1) Computational finite-element analyses (modal extraction process); and (2) Experimental modal analysis based on measured test data. This report also includes experimentally determined modal properties for a prototype LM3/Polarizer line-replaceable unit (LRU) and a prototype PEPC LRU. Two important parameters, used during the design phase, are validated through testing [ref 1]. These parameters are the natural frequencies and modal damping (of the system in question) for the first several global modes of vibration. Experimental modal testing provides these modal values, along with the corresponding mode shapes. Another important parameter, the input excitation (expected during normal operation of the NIF laser system) [ref 1], can be verified by performing a series of ambient vibration measurements in the vicinity of the particular system (or subsystem) of interest. The topic of ambient input excitation will be covered in a separate report. Due to the large mass of the Periscope Pedestal, it is difficult to excite the entire series of Periscope Pedestal Walls all at once. It was decided that the experimental modal tests would be performed on just one Periscope End Wall in Laser Bay 1. Experimental modal properties for the Periscope End Wall have been used to validate and update the FE analyses. Results from the analyses and modal tests support the conclusion that the Periscope Pedestal will not exceed the stability budget, which is described in reference 1. The results of the modal tests for the Periscope End Wall in Laser Bay 1 have provided examples of modal properties that can be derived from future modal tests of the entire Periscope Assembly (excluding the LRU's). This next series of larger modal tests can be performed after the support structure for the Periscope Assembly has been completed. There are five optical elements in the Periscope Assembly: PEPC; Polarizer; LM3; LM2; and the Periscope Light Source. All of these optical elements have stability requirements except for the PEPC. During the Title II Design phase, two prototypes of the LM3/Polarizer LRU were used in two different series of modal tests [ref 2,3]. A similar series of modal tests were conducted on a prototype of the PEPC LRU. The results of the modal tests were used to verify the modal properties assumed for use in the corresponding finite-element analyses.