Development of a Rolling Process Design Tool for Use in Improving Hot Roll Slab Recovery

Couch, R G ; Wang, P

Lawrence Livermore National Laboratory

关键词: Simulation;    Boundary Conditions;    42 Engineering;    Schedules;    Design;   

DOI  :  10.2172/15005379
RP-ID  :  UCRL-ID-139582
RP-ID  :  W-7405-ENG-48
RP-ID  :  15005379

美国|英语

来源: UNT Digital Library

【 摘 要 】

A model of the 28-inch, laboratory mill at Alcoa Technical Center was constructed, and a preliminary calculation run using an estimated initial ingot size and pass schedule to assess the computational requirements for the simulations and to develop a procedure for adjusting the mill configuration and model boundary conditions between passes. The simulation was run through three passes, and the mechanical and contact thermal boundary conditions appear to be working appropriately.