Low Cost, Durable Seal

Roberts, George ; Parsons, Jason ; Friedman, Jake

UTC Power

关键词: Hydrocarbons;    Membranes;    30 Direct Energy Conversion;    Molding;    Targets Fuel Cells, Seals, Durable Seals, Injection Molding, Lim, Liquid Injection Molding;   

DOI  :  10.2172/1000335
RP-ID  :  DOE/GO17005-Final
RP-ID  :  FG36-07GO17005
RP-ID  :  1000335

美国|英语

来源: UNT Digital Library

【 摘 要 】

Seal durability is critical to achieving the 2010 DOE operational life goals for both stationary and transportation PEM fuel cell stacks. The seal material must be chemically and mechanically stable in an environment consisting of aggressive operating temperatures, humidified gases, and acidic membranes. The seal must also be producible at low cost. Currentlyused seal materials do not meet all these requirements. This project developed and demonstrated a high consistency hydrocarbon rubber seal material that was able to meet the DOE technical and cost targets. Significant emphasis was placed on characterization of the material and full scale molding demonstrations.