A 30 MW, 200 MHz Inductive Output Tube for RF Accelerators

R. Lawrence Ives ; Michael Read

关键词: RF source;    driver;    IOT;    inductive output tube;    accelerator;    collider;   

DOI  :  10.2172/934376
RP-ID  :  Final Report
PID  :  OSTI ID: 934376

学科分类：核物理和高能物理

美国|英语

来源: SciTech Connect

【 摘 要 】

This program investigated development of a multiple beam inductive output tube (IOT) to produce 30 MW pulses at 200 MHz. The program was successful in demonstrating feasibility of developing the source to achieve the desired power in microsecond pulses with 70% efficiency. The predicted gain of the device is 24 dB. Consequently, a 200 kW driver would be required for the RF input. Estimated cost of this driver is approximately $1.25 M. Given the estimated development cost of the IOT of approximately $750K and the requirements for a test set that would significantly increase the cost, it was determined that development could not be achieved within the funding constraints of a Phase II program.