A 200 MHz 35 MW Multiple Beam Klystron for Accelerator Applications Final Report

R. Lawrence Ives ; Michael Read ; Patrick Ferguson ; David Marsden

关键词: ACCELERATION;    ACCELERATORS;    BEAM EMITTANCE;    EFFICIENCY;    FREQUENCY RANGE;    IONIZATION;    KLYSTRONS;    METERS;    MUONS;    POWER SUPPLIES;    SPACE CHARGE;    SPECIFICATIONS;    STREAMS klystron;    RF source;    accelerators;    MUON Collider;    multiple beam;   

DOI  :  10.2172/1029944
RP-ID  :  1
PID  :  OSTI ID: 1029944
Others  :  TRN: US1203726

学科分类：核物理和高能物理

美国|英语

来源: SciTech Connect

【 摘 要 】

Calabazas Creek Research, Inc. (CCR) performed initial development of a compact and reliable 35 MW, multiple beam klystron (MBK) at 200 MHz with a pulse length of 0.125 ms and a 30 Hz repetition rate. The device was targeted for acceleration and ionization cooling of a muon collider, but there are several other potential applications in this frequency range. The klystron uses multiple beams propagating in individual beam tunnels to reduce space charge and allow reduction in the accelerating voltage. This allows a significant reduction in length over a single beam source. More importantly this allows more efficient and less expensive power supplies. At 200 MHz, the interaction circuit for a single beam klystron would be more than six meters long to obtain 50% efficiency and 50 dB gain. This would require a beam voltage of approximately 400 kV and current of 251 A for a microperveance of 1.0. For an eight beam MBK with the same beam perveance, a three meter long interaction circuit achieves the same power and gain. Each beam operates at 142 kV and 70A. The Phase I demonstrated that this device could be fabricated with funding available in a Phase II program and could achieve the program specifications.