CH Packaging Operations Manual

关键词: payload;    CH;    contact-handled;    pallet;    certificate of compliance;    TRUPACT-II;    HalfPACT;    TRAMPAC;    locking ring;    dunnage drums;    four-pack;    guide tubes;    payload assembly;    eight-pack;    neutron;    beta-gamma;    alpha;    spacer;    three-pack;    U.S. Department of Energy;    Waste Isolation Pilot Plant;    TDOP;    standard waste box;    ten-drum overpack;    transport trailer;    counterweights;    OCV;    ICV;    O-rings;    leak test;    tiedowns;    OCA;    ACGLF;    vent port tool;    pallets;    flange;    validation;    calibration;    lock ring;    leakage;   

DOI  :  10.2172/988284
RP-ID  :  DOE/WIPP-02-3184,Rev.7
PID  :  OSTI ID: 988284

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing "Short" 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing "Tall" 85-gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing SWB Payload Assembly; and 1.7, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence.