Iron-Based Amorphous-Metals: High-Performance Corrosion-Resistant Materials (HPCRM) Development Final Report

Farmer, J C ; Choi, J ; Saw, C ; Haslem, J ; Day, D ; Hailey, P ; Lian, T ; Rebak, R ; Perepezko, J ; Payer, J ; Branagan, D ; Beardsley, B ; D'Amato, A ; Aprigliano, L

关键词: ALLOYS;    BORON;    CHROMIUM;    CORROSION;    CORROSION RESISTANCE;    ELECTROLYTES;    MECHANICAL PROPERTIES;    MOLYBDENUM;    NEUTRON ABSORBERS;    NUCLEAR POWER;    PERFORMANCE;    POLARIZATION;    RADIATION EFFECTS;    RADIOACTIVE WASTE MANAGEMENT;    STAINLESS STEELS;    TRANSITION TEMPERATURE;    TUNGSTEN;   

DOI  :  10.2172/950625
RP-ID  :  LLNL-TR-411407
PID  :  OSTI ID: 950625
Others  :  TRN: US0902044

学科分类：材料科学（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

An overview of the High-Performance Corrosion-Resistant Materials (HPCRM) Program, which was co-sponsored by the Defense Advanced Research Projects Agency (DARPA) Defense Sciences Office (DSO) and the United States Department of Energy (DOE) Office of Civilian and Radioactive Waste Management (OCRWM), is discussed. Programmatic investigations have included a broad range of topics: alloy design and composition; materials synthesis; thermal stability; corrosion resistance; environmental cracking; mechanical properties; damage tolerance; radiation effects; and important potential applications. Amorphous alloys identified as SAM2X5 (Fe{sub 49.7}Cr{sub 17.7}Mn{sub 1.9}Mo{sub 7.4}W{sub 1.6}B{sub 15.2}C{sub 3.8}Si{sub 2.4}) and SAM1651 (Fe{sub 48}Mo{sub 14}Cr{sub 15}Y{sub 2}C{sub 15}B{sub 6}) have been produced as melt-spun ribbons, drop-cast ingots and thermal-spray coatings. Chromium (Cr), molybdenum (Mo) and tungsten (W) additions provided corrosion resistance, while boron (B) enabled glass formation. Earlier electrochemical studies of melt-spun ribbons and ingots of these amorphous alloys demonstrated outstanding passive film stability. More recently thermal-spray coatings of these amorphous alloys have been made and subjected to long-term salt-fog and immersion tests. Good corrosion resistance has been observed during salt-fog testing. Corrosion rates were measured in situ with linear polarization, while simultaneously monitoring the open-circuit corrosion potentials. Reasonably good performance was observed. The sensitivity of these measurements to electrolyte composition and temperature was determined. The high boron content of this particular amorphous metal make this amorphous alloy an effective neutron absorber, and suitable for criticality control applications. In general, the corrosion resistance of these iron-based amorphous metals is maintained at operating temperatures up to the glass transition temperature. These materials are much harder than conventional stainless steel and nickel-based materials, and are proving to have excellent wear properties, sufficient to warrant their use in earth excavation, drilling and tunnel boring applications. The observed corrosion resistance may enable applications of importance in industries such as: oil and gas production, refining, nuclear power generation, shipping, and others. Large areas have been successfully coated with these materials, with thicknesses of approximately one centimeter.