Report on 238Pu(n,x) surrogate cross section measurement

Burke, J T ; Ressler, J J ; Henderson, R A ; Scielzo, N D ; Escher, J E ; Thompson, I J ; Gostic, J ; Bleuel, D ; Weideking, M ; Bernstein, L A

关键词: COMPOUND NUCLEI;    CROSS SECTIONS;    CYCLOTRONS;    DATA ANALYSIS;    DEC;   

DOI  :  10.2172/975236
RP-ID  :  LLNL-TR-427145
PID  :  OSTI ID: 975236
Others  :  TRN: US1002826

美国|英语

来源: SciTech Connect

【 摘 要 】

The goal of this year's effort is to measure the {sup 238}Pu(n,f) and {sup 238}Pu(n,2n) cross section from 100 keV to 20 MeV. We designed a surrogate experiment that used the reaction {sup 239}Pu(a,a{prime}x) as a surrogate for {sup 238}Pu(n,x). The experiment was conducted using the STARS/LIBERACE experimental facility located at the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory in January 2010. A description of the experiment and status of the data analysis is given. In order to obtain a reliable {sup 238}Pu(n,x) cross section we designed the experiment using the surrogate ratio technique. This technique allows one to measure a desired, unknown, cross section relative to a known cross section. In the present example, the {sup 238}Pu(n,x) cross section of interest is determined relative to the known {sup 235}U(n,x) cross section. To increase confidence in the results, and to reduce overall uncertainties, we are also determining the {sup 238}Pu(n,x) cross section relative to the known {sup 234}U(n,x) cross section. The compound nuclei of interest for this experiment were produced using inelastic alpha scattering. For example, {sup 236}U(a,a{prime}x) served as a surrogate for {sup 235}U(n,x); analogous reactions were considered for the other cross sections. Surrogate experiments determine the probabilities for the decay of the compound nuclei into the various channels of interest (fission, gamma decay) by measuring particle-fission (p-f) or particle?gamma (p?g) reaction spectra. By comparing the decay probabilities associated with the unknown cross section to that of a known cross section it is possible to obtain the ratio of these cross sections and thus determine the unknown, desired cross section.