Methodology Using MELCOR Code to Model Proposed Hazard Scenario

Gavin Hawkley

关键词: ACCIDENTS;    ALARA;    COMPUTERIZED SIMULATION;    EVALUATION;    HAZARDS;    M CODES;    PARTICLES;    POWDERS;    RADIOACTIVE AEROSOLS;    SOURCE TERMS Hawkley;    INL;    MELCOR Code;    Radioactive Hazards;    Release Scenarios;   

DOI  :  10.2172/989877
RP-ID  :  INL/EXT-10-19581
PID  :  OSTI ID: 989877
Others  :  TRN: US1007241

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

This study demonstrates a methodology for using the MELCOR code to model a proposed hazard scenario within a building containing radioactive powder, and the subsequent evaluation of a leak path factor (LPF) (or the amount of respirable material which that escapes a facility into the outside environment), implicit in the scenario. This LPF evaluation will analyzes the basis and applicability of an assumed standard multiplication of 0.5 ?? 0.5 (in which 0.5 represents the amount of material assumed to leave one area and enter another), for calculating an LPF value. The outside release is dependsent upon the ventilation/filtration system, both filtered and un-filtered, and from other pathways from the building, such as doorways (, both open and closed). This study is presents ed to show how the multiple leak path factorsLPFs from the interior building can be evaluated in a combinatory process in which a total leak path factorLPF is calculated, thus addressing the assumed multiplication, and allowing for the designation and assessment of a respirable source term (ST) for later consequence analysis, in which: the propagation of material released into the environmental atmosphere can be modeled and the dose received by a receptor placed downwind can be estimated and the distance adjusted to maintains such exposures as low as reasonably achievableALARA.. Also, this study will briefly addresses particle characteristics thatwhich affect atmospheric particle dispersion, and compares this dispersion with leak path factorLPF methodology.