REVIEW OF EXPERIMENTAL STUDIES INVESTIGATING THE RATE OF STRONTIUM AND ACTINIDE ADSORPTION BY MONOSODIUM TITANATE

Hobbs, D.

关键词: AR FACILITIES;    ACTINIDES;    ADSORPTION;    FORECASTING;    ION EXCHANGE;    NEPTUNIUM;    PLUTONIUM;    RADIOACTIVE WASTES;    REMOVAL;    SAVANNAH RIVER;    SORPTION;    STRONTIUM;    TANKS;    TITANATES;    TRANSPORT;   

DOI  :  10.2172/1001173
RP-ID  :  SRNL-STI-2010-00438
PID  :  OSTI ID: 1001173
Others  :  TRN: US1100439

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

A number of laboratory studies have been conducted to determine the influence of mixing and mixing intensity, solution ionic strength, initial sorbate concentrations, temperature, and monosodium titanate (MST) concentration on the rates of sorbate removal by MST in high-level nuclear waste solutions. Of these parameters, initial sorbate concentrations, ionic strength, and MST concentration have the greater impact on sorbate removal rates. The lack of a significant influence of mixing and mixing intensity on sorbate removal rates indicates that bulk solution transport is not the rate controlling step in the removal of strontium and actinides over the range of conditions and laboratory-scales investigated. However, bulk solution transport may be a significant parameter upon use of MST in a 1.3 million-gallon waste tank such as that planned for the Small Column Ion Exchange (SCIX) program. Thus, Savannah River National Laboratory (SRNL) recommends completing the experiments in progress to determine if mixing intensity influences sorption rates under conditions appropriate for this program. Adsorption models have been developed from these experimental studies that allow prediction of strontium (Sr), plutonium (Pu), neptunium (Np) and uranium (U) concentrations as a function of contact time with MST. Fairly good agreement has been observed between the predicted and measured sorbate concentrations in the laboratory-scale experiments.