Surface rheology and interface stability.

Yaklin, Melissa A. ; Cote, Raymond O. ; Moffat, Harry K. ; Grillet, Anne Mary ; Walker, Lynn ; Koehler, Timothy P. ; Reichert, Matthew D. (Carnegie Mellon University, Pittsburgh, PA) ; Castaneda, Jaime N. ; Mondy, Lisa Ann ; Brooks, Carlton, F.

关键词: INTERFACES;    RHEOLOGY;    MEASURING INSTRUMENTS;    SENSITIVITY;    PERFORMANCE;    SURFACE TENSION;    BUBBLES;    FOAMS;    STABILITY;    FINITE ELEMENT METHOD;    NAVIER-STOKES EQUATIONS;   

DOI  :  10.2172/1002101
RP-ID  :  SAND2010-7501
PID  :  OSTI ID: 1002101
Others  :  TRN: US201104%%14

美国|英语

来源: SciTech Connect

【 摘 要 】

We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk fluid.