Monte Carlo modeling and analyses of YALINA booster subcritical assembly, Part III : low enriched uranium conversion analyses.

Talamo, A. ; Gohar, Y. (Nuclear Engineering Division)

关键词: ACCELERATORS;    ALTERNATIVE FUELS;    BELARUS;    CALIFORNIUM;    DELAYED NEUTRON FRACTION;    ENRICHED URANIUM;    FAST NEUTRONS;    LIFETIME;    MULTIPLICATION FACTORS;    NEUTRON FLUX;    NEUTRON GENERATORS;    NEUTRON REACTIONS;    NEUTRON SOURCES;    NEUTRONS;    NUCLEAR REACTIONS;    PROMPT NEUTRONS;    SPECTRA;    TRANSMUTATION;   

DOI  :  10.2172/1027711
RP-ID  :  ANL-11/03
PID  :  OSTI ID: 1027711
Others  :  TRN: US1105792

学科分类：核物理和高能物理

美国|英语

来源: SciTech Connect

【 摘 要 】

This study investigates the performance of the YALINA Booster subcritical assembly, located in Belarus, during operation with high (90%), medium (36%), and low (21%) enriched uranium fuels in the assembly's fast zone. The YALINA Booster is a zero-power, subcritical assembly driven by a conventional neutron generator. It was constructed for the purpose of investigating the static and dynamic neutronics properties of accelerator driven subcritical systems, and to serve as a fast neutron source for investigating the properties of nuclear reactions, in particular transmutation reactions involving minor-actinides. The first part of this study analyzes the assembly's performance with several fuel types. The MCNPX and MONK Monte Carlo codes were used to determine effective and source neutron multiplication factors, effective delayed neutron fraction, prompt neutron lifetime, neutron flux profiles and spectra, and neutron reaction rates produced from the use of three neutron sources: californium, deuterium-deuterium, and deuterium-tritium. In the latter two cases, the external neutron source operates in pulsed mode. The results discussed in the first part of this report show that the use of low enriched fuel in the fast zone of the assembly diminishes neutron multiplication. Therefore, the discussion in the second part of the report focuses on finding alternative fuel loading configurations that enhance neutron multiplication while using low enriched uranium fuel. It was found that arranging the interface absorber between the fast and the thermal zones in a circular rather than a square array is an effective method of operating the YALINA Booster subcritical assembly without downgrading neutron multiplication relative to the original value obtained with the use of the high enriched uranium fuels in the fast zone.