Monte Carlo modeling and analyses of YALINA-booster subcritical assembly part 1: analytical models and main neutronics parameters.

Talamo, A. ; Gohar, M. Y. A. ; Nuclear Engineering Division

关键词: AR FACILITIES;    ACCELERATORS;    BELARUS;    BENCHMARKS;    BURNUP;    CALIFORNIUM 252;    COMBUSTION;    COMPUTER CODES;    DEUTERON BEAMS;    IAEA;    NEUTRON SOURCES;    NEUTRONS;    PHYSICS;    RADIOACTIVE WASTES;    SIMULATION;    SPECIFICATIONS;    SPONTANEOUS FISSION;   

DOI  :  10.2172/937414
RP-ID  :  ANL-NE-08/13
PID  :  OSTI ID: 937414
Others  :  TRN: US0805796

美国|英语

来源: SciTech Connect

【 摘 要 】

This study was carried out to model and analyze the YALINA-Booster facility, of the Joint Institute for Power and Nuclear Research of Belarus, with the long term objective of advancing the utilization of accelerator driven systems for the incineration of nuclear waste. The YALINA-Booster facility is a subcritical assembly, driven by an external neutron source, which has been constructed to study the neutron physics and to develop and refine methodologies to control the operation of accelerator driven systems. The external neutron source consists of Californium-252 spontaneous fission neutrons, 2.45 MeV neutrons from Deuterium-Deuterium reactions, or 14.1 MeV neutrons from Deuterium-Tritium reactions. In the latter two cases a deuteron beam is used to generate the neutrons. This study is a part of the collaborative activity between Argonne National Laboratory (ANL) of USA and the Joint Institute for Power and Nuclear Research of Belarus. In addition, the International Atomic Energy Agency (IAEA) has a coordinated research project benchmarking and comparing the results of different numerical codes with the experimental data available from the YALINA-Booster facility and ANL has a leading role coordinating the IAEA activity. The YALINA-Booster facility has been modeled according to the benchmark specifications defined for the IAEA activity without any geometrical homogenization using the Monte Carlo codes MONK and MCNP/MCNPX/MCB. The MONK model perfectly matches the MCNP one. The computational analyses have been extended through the MCB code, which is an extension of the MCNP code with burnup capability because of its additional feature for analyzing source driven multiplying assemblies. The main neutronics parameters of the YALINA-Booster facility were calculated using these computer codes with different nuclear data libraries based on ENDF/B-VI-0, -6, JEF-2.2, and JEF-3.1.