Measuring Residential Ventilation System Airflows: Part 1 ??? Laboratory Evaluation of Airflow Meter Devices

Stratton, J. Chris¹  Turner, W. J. N.¹  Wray, Craig P.¹  Walker, Iain S.¹ 

[1] Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

关键词: residential;    mechanical ventilation;    measurement;    ASHRAE 62.2;    flow hood;   

DOI  :  10.2172/1168596
RP-ID  :  LBNL--5983E
PID  :  OSTI ID: 1168596

学科分类：能源（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

Building codes increasingly require tighter homes and mechanical ventilation per ASHRAE Standard 62.2. These ventilation flows must be measured so that energy is not wasted with over ventilation and occupants??? health is not compromised by under ventilation. Flow hoods are used to measure these ventilation flows, but there is currently no standard specifying the measurement procedure and measurement devices that should be used. This study evaluates the accuracy of six commercially available flow hoods under laboratory conditions configured to emulate a residential mechanical ventilation duct system. The measurements taken with the flow hoods were compared to simultaneous measurements taken by an in-line reference flow meter having a known uncertainty. Results indicate that powered flow hoods yield more accurate measurements than non-powered flow hoods, and that a majority of the flow hoods measured inlet flows more accurately than outlet flows. In several cases, there was little resemblance between the manufacturers??? stated accuracy and the accuracy we found in our laboratory measurements. It is clear that current flow hood calibration procedures may not consider field application variables such as flow asymmetry, flow angle, and flow direction. A new flow hood measurement standard that takes these ???real world??? conditions into account should be developed to ensure that residential buildings receive the intended ventilation flows.