Analytical Results For MOX Colemanite Concrete Samples Received On November, 2013

Reigel, Marissa M.

关键词: MOX;    Colemanite Concrete;   

DOI  :  10.2172/1111410
RP-ID  :  SRNL-STI--2013-00737
PID  :  OSTI ID: 1111410
Others  :  TRN: US1400057

美国|英语

来源: SciTech Connect

【 摘 要 】

The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. SRNL received two samples of colemanite concrete for analysis on November 21, 2013. The average total density of each of the samples measured by the ASTM method C 642, the average partial hydrogen density was measured using method ASTM E 1131, and the average partial boron density of each sample was measured according to ASTM C 1301. For all the samples tested, the total density and the boron partial density met or exceeded the specified limit. None of the samples met the lower limit for hydrogen partial density.