Initial and Long-Term Movement of Cladding Installed Over Exterior Rigid Insulation

Baker, Peter¹ 

[1] Building Science Corporation, Somerville, MA (United States)

关键词: Residential;    Residential Buildings;    BSC;    Building America;    cladding;    exterior insulation;    rigid insulation;    high performance wall;    creep;    fastener bending;    thermal expansion and contraction;    long term exposure;   

DOI  :  10.2172/1220295
RP-ID  :  DOE/GO--102014-4472
PID  :  OSTI ID: 1220295
Others  :  Other: 6882

美国|英语

来源: SciTech Connect

【 摘 要 】

Changes in the International Energy Conservation Code (IECC) from 2009 to 2012 have resulted in the use of exterior rigid insulation becoming part of the prescriptive code requirements. With more jurisdictions adopting the 2012 IECC builders will be required to incorporate exterior insulation in the construction of their exterior wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. This research was an extension on previous research conducted by Building Science Corporation in 2011, and 2012. Each year the understanding of the system discrete load component interactions, as well as impacts of environmental loading, has increased. The focus of the research was to examine more closely the impacts of screw fastener bending on the total system capacity, effects of thermal expansion and contraction of materials on the compressive forces in the assembly, as well as to analyze a full year???s worth of cladding movement data from assemblies constructed in an exposed outdoor environment.