Ultra Barrier Topsheet Film for Flexible Photovoltaics with 3M Company

Funkenbusch, Arnie¹  Ruth, Charles¹ 

[1] 3M Company, Saint Paul, MN (United States)

关键词: photovoltaic modules;    flexible modules;    durable modules;   

DOI  :  10.2172/1166732
RP-ID  :  DOE-3M--0004739
PID  :  OSTI ID: 1166732
Others  :  Other: Lot 3053

学科分类：再生能源与代替技术

美国|英语

来源: SciTech Connect

【 摘 要 】

In this DOE sponsored program, 3M achieved the critical UBT features to enable durable flexible high efficiency modules to be produced by a range of customers who have now certified the 3M UBT and are actively developing said flexible modules. The specific objectives and accomplishments of the work under this program were; Scale-up the current Generation-1 UBT from 12??? width, as made on 3M???s pilot line, to 1+meter width full-scale manufacturing, while maintaining baseline performance metrics (see table below); This objective was fully met; Validate service life of Generation-1 UBT for the 25+ year lifetime demanded by the photovoltaic market; Aggressive testing revealed potential failure modes in the Gen 1 UBT. Deficiencies were identified and corrective action taken in the Gen 2 UBT; Develop a Generation-2 UBT on the pilot line, targeting improved performance relative to baseline, including higher %T (percent transmission), lower water vapor transmission rate (WVTR) with targets based on what the technology needs for 25 year lifetime, proven lifetime of 25 years in solar module construction in the field, and lower cost; Testing of UBT Gen 2 under a wide range of conditions presented in this report failed to reveal any failure mode. Therefore UBT Gen 2 is known to be highly durable. 3M will continue to test towards statistically validating a 25 year lifetime under 3M funding; Transfer Generation-2 UBT from the pilot line to the full-scale manufacturing line within three years; and This objective was fully met.