Fabrication of ATALANTE Dissolver Off-Gas Sorbent-Based Capture System

Walker, Jr., Joseph Franklin¹  Jubin, Robert Thomas¹ 

[1] Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

关键词: Atalante;    DOG;    Dissolver Off-gas;   

DOI  :  10.2172/1325415
RP-ID  :  ORNL/LTR--2015/172
PID  :  OSTI ID: 1325415
Others  :  Other: AF5805010
Others  :  NEAF327

美国|英语

来源: SciTech Connect

【 摘 要 】

A small sorbent-based capture system was designed that could be placed in the off-gas line from the fuel dissolver in the ATALANTE hot cells with minimal modifications to the ATALANTE dissolver off-gas system. Discussions with personnel from the ATALANTE facility provided guidance that was used for the design. All components for this system have been specified, procured, and received on site at Oak Ridge National Laboratory (ORNL), meeting the April 30, 2015, milestone for completing the fabrication of the ATALANTE dissolver off-gas capture system. This system will be tested at ORNL to verify operation and to ensure that all design requirements for ATALANTE are met. Modifications to the system will be made, as indicated by the testing, before the system is shipped to ATALANTE for installation in the hot cell facility.