Measurement of Actinides in Molybdenum-99 Solution Analytical Procedure

Soderquist, Chuck Z.¹  Weaver, Jamie L.¹ 

[1]Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

关键词: NITRIC ACID;    PRECIPITATION;    MEMBRANES;    CARRIERS;    SUSPENSIONS;    MOLYBDENUM 99;    SOLUTIONS;    GADOLINIUM HYDROXIDES;    ACTINIDES;    GADOLINIUM;    AMMONIUM HYDROXIDES;    ALPHA SPECTROSCOPY;    FILTERS;    TRACE AMOUNTS;    ALPHA DECAY RADIOISOTOPES;    RADIOMETRIC ANALYSIS Molybdenum-99;    Tc-99m;   

DOI  :  10.2172/1244821
RP-ID  :  PNNL--24918
PID  :  OSTI ID: 1244821
Others  :  Other: NN9100000
Others  :  TRN: US1601171

学科分类：化学（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

This document is a companion report to a previous report, PNNL 24519, Measurement of Actinides in Molybdenum-99 Solution, A Brief Review of the Literature, August 2015. In this companion report, we report a fast, accurate, newly developed analytical method for measurement of trace alpha-emitting actinide elements in commercial high-activity molybdenum-99 solution. Molybdenum-99 is widely used to produce ^99mTc for medical imaging. Because it is used as a radiopharmaceutical, its purity must be proven to be extremely high, particularly for the alpha emitting actinides. The sample of ⁹⁹Mo solution is measured into a vessel (such as a polyethylene centrifuge tube) and acidified with dilute nitric acid. A gadolinium carrier is added (50 ??g). Tracers and spikes are added as necessary. Then the solution is made strongly basic with ammonium hydroxide, which causes the gadolinium carrier to precipitate as hydrous Gd(OH)₃. The precipitate of Gd(OH)₃ carries all of the actinide elements. The suspension of gadolinium hydroxide is then passed through a membrane filter to make a counting mount suitable for direct alpha spectrometry. The high-activity ⁹⁹Mo and ^99mTc pass through the membrane filter and are separated from the alpha emitters. The gadolinium hydroxide, carrying any trace actinide elements that might be present in the sample, forms a thin, uniform cake on the surface of the membrane filter. The filter cake is first washed with dilute ammonium hydroxide to push the last traces of molybdate through, then with water. The filter is then mounted on a stainless steel counting disk. Finally, the alpha emitting actinide elements are measured by alpha spectrometry.