Analysis of xRAGE and flag high explosive burn models with PBX 9404 cylinder tests

Harrier, Danielle¹  Andersen, Kyle Richard¹ 

[1] Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

关键词: xRAGE;    FLAG;    cylinder test;    Gurney Velocity;   

DOI  :  10.2172/1296691
RP-ID  :  LA-UR--16-26076
PID  :  OSTI ID: 1296691

美国|英语

来源: SciTech Connect

【 摘 要 】

High explosives are energetic materials that release their chemical energy in a short interval of time. They are able to generate extreme heat and pressure by a shock driven chemical decomposition reaction, which makes them valuable tools that must be understood. This study investigated the accuracy and performance of two Los Alamos National Laboratory hydrodynamic codes, which are used to determine the behavior of explosives within a variety of systems: xRAGE which utilizes an Eulerian mesh, and FLAG with utilizes a Lagrangian mesh. Various programmed and reactive burn models within both codes were tested using a copper cylinder expansion test. The test was based on a recent experimental setup which contained the plastic bonded explosive PBX 9404. Detonation velocity versus time curves for this explosive were obtained using Photon Doppler Velocimetry (PDV). The modeled results from each of the burn models tested were then compared to one another and to the experimental results. This study validate