Determining the initial configuration and characterizing the mechanical properties of 3D angle-interlock fabrics using finite element simulation

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

卷:154

Article

Durville, Damien¹  Baydoun, Ibrahim¹  Moustacas, Helene^1,2  Perie, Guillaume²  Wielhorski, Yanneck² 

[1] Univ Paris Saclay, CNRS, MSSMat Lab, Cent Supelec, Paris, France

[2] Safran Aircraft Engines, F-77550 Moissy Cramayel, France

关键词: 3D Angle-interlock fabric;    Finite element simulation;    Initial configuration;    Mechanical properties;    Transverse compression;   

DOI  :  10.1016/j.ijsolstr.2017.06.026

来源: Elsevier

【 摘 要 】

A finite element simulation approach to the mechanical behaviour of 3D angle-interlock fabrics at the scale of their internal components, using an implicit scheme, is presented in this paper. Based on the determination of the static equilibrium of assemblies of fibres, this approach is used first to find the unknown initial configuration of a unit cell of angle-interlock fabric, by implementing an original method to gradually separate initially inter-penetrating yarns. This method, only based on the weaving pattern, does not require any geometrical pre-processor. Various loading cases can then be simulated to characterize the non-linear behaviour of such fabrics. Applications to the determination of the initial configuration of the unit cell of a typical example of a 5-layer angle-interlock fabric, and to the simulation of a transverse compression test and a forming test are presented. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free