Treatment of Cu/Zn wastes by combined PSU-electrodeposition processes

JOURNAL OF ENVIRONMENTAL MANAGEMENT

卷:116

Article

Llanos, Javier¹  Rodrigo, Manuel A.¹  Perez, Angel¹  Canizares, Pablo¹ 

[1] Univ Castilla La Mancha, Dept Chem Engn, Ciudad Real 13005, Spain

关键词: Electrodeposition;    Copper;    Selective separation;    Ultrafiltration;    Electrochemical regeneration;   

DOI  :  10.1016/j.jenvman.2012.11.041

来源: Elsevier

【 摘 要 】

This work is focused on the study of the electrodeposition stage of a combined polymer-supported ultrafiltration (PSU)-electrodeposition process for the recovery and selective separation of Cu/Zn mixtures. With this aim, the electrodeposition of Cu/Zn mixtures was evaluated in the presence of ethoxylated polyethylenimine, a polymer that has exhibited good performance in PSU processes in previous studies and whose performance has been fully characterised in the literature. It was determined that at pH values equal to or less than 4, macromolecular complexes formed with both Cu and Zn are weak and electrodeposition can take place very efficiently, with the deposition of copper being strongly favoured. For values of the applied electrical charge equal or greater than 0.1 A h dm(-3), the purity of the copper deposit is greater than 99% for the range of Cu/Zn molar ratios between 1 and infinity. Next, long-term experiments in continuous mode showed that the average deposition rate was close to the maximum rate achieved when operating in discontinuous mode and that the electrodeposition process does not negatively affect the performance of the polymer in the PSU processes. (C) 2012 Elsevier Ltd. All rights reserved.

【 授权许可】

Free