Accounting for biogenic carbon and end-of-life allocation in life cycle assessment of multi-output wood cascade systems

JOURNAL OF CLEANER PRODUCTION

卷:275

Article

Garcia, Rita¹  Alvarenga, Rodrigo A. F.²  Huysveld, Sophie²  Dewulf, Jo²  Allacker, Karen³ 

[1] Univ Coimbra, Dept Mech Engn, ADAI, Rua Luis Reis Santos, P-3030788 Coimbra, Portugal

[2] Univ Ghent, Fac Biosci Engn, Dept Green Chem & Technol, Sustainable Syst Engn STEN, Coupure Links 653, B-9000 Ghent, Belgium

[3] Katholieke Univ Leuven, Fac Engn Sci, Dept Architecture, Leuven, Belgium

关键词: Environmental impact;    Recycling;    Timber products;    Circular economy;   

DOI  :  10.1016/j.jclepro.2020.122795

来源: Elsevier

【 摘 要 】

Wood cascade systems composed of products with long service lives can contribute to carbon storage, resource efficiency and circular economy. The environmental assessment of such multi-output systems is however challenging due to (i) multiple products and recycling steps, and (ii) the distribution of emissions, particularly of biogenic CO2, over long time spans. In Life Cycle Assessment (LCA), the former is usually dealt through end-of-life (EoL) allocation methods, while the latter is assessed via biogenic carbon accounting (BCA) methods. This article aims to assess how different BCA and EoL allocation methods may influence the LCA results of wood cascade systems, particularly their biogenic carbon footprint (BCF), both at supply chain and product levels. Six BCA methods and five EoL allocation methods were analysed, combined and applied to a wood cascade system delivering multiple products: (1) flooring, (4) particleboard (PB) and (5) electricity (reference flow: 1 m(3) wood). At supply chain level (prior to the application of EoL allocation methods), distinct BCFs were obtained ranging from -211 to +52 kgCO(2)eq/m(3) of wood (as input). At product level, when applying the different EoL allocation methods, the variability further increased. For instance, the BCF of PB ranged from -5.61 to +0.04 kgCO(2)eq/kgPB; while the BCF of electricity ranged from -0.50 to +0.39 kgCO(2)eq/kWh (considering results within the 25-75 percentiles). Other factors influencing the results were the assumptions regarding the timing of forest growth, the stage in the cascade chain, the recycling content and the EoL scenario. A proper understanding of the influence of the BCA and EoL allocation methods and their assumptions on the BCF of wood cascading products is key, especially for countries/regions promoting a circular economy. (C) 2020 Elsevier Ltd. All rights reserved.

【 授权许可】

Free