Numerical comparison of a solar dish concentrator with different cavity receivers and working fluids

JOURNAL OF CLEANER PRODUCTION

卷:198

Article

Loni, Reyhaneh¹  Asli-Ardeh, E. Askari¹  Ghobadian, B.²  Bellos, Evangelos³  Le Roux, W. G.⁴ 

[1] Univ Mohaghegh Ardabili, Dept Mech Biosyst Engn, Ardebil, Iran

[2] Tarbiat Modares Univ, Dept Mech Biosyst Engn, Tehran, Iran

[3] Natl Tech Univ Athens, Sch Mech Engn, Thermal Dept, Heroon Polytechniou 9, Athens 15780, Greece

[4] Univ Pretoria, Dept Mech & Aeronaut Engn, Pretoria, South Africa

关键词: Solar dish;    Cavity absorber;    Exergy analysis;    Pressure drop;    Thermal oil;   

DOI  :  10.1016/j.jclepro.2018.07.075

来源: Elsevier

【 摘 要 】

Solar concentrating technologies can produce heat for applications such as solar heating, solar cooling, industrial processes, desalination and electric power generation. For a solar dish collector, various solar receivers and working fluids at different flow rates can be used in different applications. In this work, three different cavity receivers are investigated for application in a solar dish collector using either water or Behran oil. A numerical model is used in the analysis, which is validated with experimental results from a hemispherical cavity receiver using oil as working fluid. The model is applied to compare hemispherical, cylindrical and cubical receivers under the same operating conditions using either water or oil, at a volumetric flow rate of 100 ml/s and solar irradiance of 800 W/m(2), in order to determine the most suitable cavity for a specific solar dish. The system is investigated for inlet temperatures ranging from 40 degrees C to 90 degrees C with water as working fluid, and from 40 degrees C to 300 degrees C with Behran oil as working fluid. Emphasis is placed on the calculation of useful heat production, as well as pressure drop which influences pumping power. The exergetic efficiency criterion and the overall efficiency criterion are used in order to evaluate the useful heat production and the pumping power simultaneously. The high exergetic efficiency of the hemispherical cavity with thermal oil at high temperatures makes this case a promising choice for high-temperature solar dish collector applications. Moreover, water is found to be the best candidate for low-temperature applications since it leads to the higher thermal efficiency with lower pumping power demand. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free