Mechanical behavior and failure mechanisms of Li-ion battery separators

JOURNAL OF POWER SOURCES

卷:348

Article

Kalnaus, Sergiy¹  Wang, Yanli²  Turner, John A.¹ 

[1] Oak Ridge Natl Lab, Comp Sci & Math Div, Oak Ridge, TN 37831 USA

[2] Oak Ridge Natl Lab, Mat Sci & Technol Div, Oak Ridge, TN 37831 USA

关键词: Lithium-ion;    Separator;    Polymer;    Rate sensitivity;    Mechanical;    Safety;   

DOI  :  10.1016/j.jpowsour.2017.03.003

来源: Elsevier

【 摘 要 】

Anisotropic mechanical properties were experimentally determined and compared for three types of commercially available Li-ion battery separators: Celgard 2325, Celgard PP2075 dry-processed polymer separators, and DreamWeaver Gold 40 non-woven separator. Significant amount of anisotropy of properties was determined, with the Young's modulus being different by up to a factor of 5 and ultimate strength being different by a factor of 10 between orthogonal directions within a polymer separator layer. Strain rate sensitivity was investigated by applying strain rates ranging from 1.10(-4) s(-1) to 0.1 s(-1). Significant strengthening was observed and the strain rate strengthening coefficients were determined for both elastic modulus and yield stress in case of polymer separators. Digital image correlation technique was used to measure and map the strains over the specimen's gage section. Significant strain concentration in bands running perpendicular to the tensile axis was observed in polymer separator samples oriented in transverse direction. Such localized necking allows for extremely high strains close to 300% to develop in the material. The failure mode was remarkably different for all three types of separators which adds additional variable in safe design of Li-ion batteries for prevention of internal short circuits. (C) 2017 Elsevier B.V. All rights reserved.

【 授权许可】

Free