Low temperature solid oxide fuel cells with pulsed laser deposited bi-layer electrolyte

JOURNAL OF POWER SOURCES

卷:164

Article

Yang, Dongfang ; Zhang, Xinge ; Nikumb, Suwas ; Deces-Petit, Cyrille ; Hui, Rob ; Maric, Radenka ; Ghosh, Dave

关键词: SOFC;    low temperature;    SDC;    ScSZ;    bi-layer electrolyte;    pulsed laser deposition;   

DOI  :  10.1016/j.jpowsour.2006.09.102

来源: Elsevier

【 摘 要 】

Solid oxide fuel cells (SOFC) using a pulsed laser deposited bi-layer electrolyte have been successfully fabricated and have shown very good performance at low operating temperatures. The cell reaches power densities of 0.5 W cm(-2) at 550 degrees C and 0.9 W cm(-2) at 600 degrees C, with open circuit voltage (OCV) values larger than 1.04 V The bi-layer electrolyte contains a 6-7 mu m, thick sarnarium-doped ceria (SDC) layer deposited over a similar to 1 mu m thick scandium-stabilized zirconia (ScSZ) layer. The electrical leaking between the anode and cathode through the SDC electrolyte, which due to the reduction of Ce4+ to Ce3+ in reducing environment when using a single layer SDC electrolyte, has been eliminated by adopting the bi-layer electrolyte concept. Both ScSZ and SDC layers in the bi-layer electrolyte prepared by the pulsed laser deposition (PLD) technique are the highly conductive cubic phases. Poor conductive (Zr, Ce)O-2-based solid solutions or P-phase ScSZ were not found in the bi-layer electrolyte prepared by the PLD due to low processing temperatures of the technique. Excellent reliability and flexibility of the PLD technique makes it a very promising technique for the fabrication of thin electrolyte layer for SOFCs operating at reduced temperatures. (c) 2006 Elsevier B.V. All rights reserved.

【 授权许可】

Free