Microbeam synchrotron radiation diffraction and fluorescence of oxide layers formed on zirconium alloys at different corrosion temperatures

JOURNAL OF NUCLEAR MATERIALS

卷:526

Article

Ensor, Brendan^1,2  Spengler, David J.²  Seidensticker, John R.³  Bajaj, Ram³  Cai, Zhonghou⁴  Motta, Arthur T.¹ 

[1] Penn State Univ, Dept Mech & Nucl Engn, University Pk, PA 16802 USA

[2] Naval Nucl Lab, Schenectady, NY 12309 USA

[3] Naval Nucl Lab, West Mifflin, PA 15122 USA

[4] Argonne Natl Lab, Adv Photon Source, Argonne, IL 60439 USA

关键词: Zirconium alloy;    Zircaloy-4;    Corrosion;    Synchrotron radiation;   

DOI  :  10.1016/j.jnucmat.2019.151779

来源: Elsevier

【 摘 要 】

Autoclave corrosion tests of Zircaloy-4 were performed at temperatures ranging from 274 degrees C to 427 degrees C to determine how the characteristics of the oxide layer changed with corrosion temperature. Corroded samples were prepared in cross-section and examined at the Advanced Photon Source using x-ray diffraction and fluorescence with sub-micron spatial resolution. These measurements provide high fidelity data for characterization of the oxide layer grown on zirconium alloys over a range of temperatures to better understand the fundamental mechanisms of corrosion. It was found that the size of the monoclinic oxide grains increases with distance from the metal-oxide interface, while the average grain size of the tetragonal oxide phase decreases. This is consistent with the continuous nucleation of a mixture of equiaxed tetragonal and monoclinic grains at the metal-oxide interface, of which only the monoclinic oxide grains that are properly aligned to minimize stresses grow into long columnar oxide grains. The tetragonal phase oxide grains transform to monoclinic oxide once a critical size is reached. While the monoclinic oxide grain size increases with corrosion temperature, the tetragonal phase grain size remains below a maximum value. Evolution of the tetragonal fraction, calculated with the Garvie-Nicholson formula, was observed, with local maxima seen just before transition and local minima seen at oxide locations corresponding to the oxide kinetic transition. No difference was observed in the tetragonal phase fraction in the oxide layers formed at different corrosion temperatures. Detailed fluorescence and diffraction mapping of one sample showed the evolution of the diffraction intensity over a short range in the oxide. This work provides a systematic study revealing fundamental characteristics of the microstructure of Zircaloy-4 oxide layers to further understanding of corrosion resistance of these materials. (C) 2019 Elsevier B.V. All rights reserved.

【 授权许可】

Free