Optimization of synthesis and peptization steps to obtain iron oxide nanoparticles with high energy dissipation rates

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS

卷:394

Article

Merida, Fernando¹  Chiu-Lam, Andreina²  Bohorquez, Ana C.³  Maldonado-Camargo, Lorena²  Perez, Maria-Eglee⁴  Pericchi, Luis⁴  Torres-Lugo, Madeline¹  Rinaldi, Carlos^2,3 

[1] Univ Puerto Rico, Deparment Chem Engn, Mayaguez, PR 00680 USA

[2] Univ Florida, Dept Chem Engn, Gainesville, FL 32611 USA

[3] Univ Florida, J Crayton Pruitt Family Dept Biomed Engn, Gainesville, FL 32611 USA

[4] Univ Puerto Rico, Dept Math, San Juan, PR 00936 USA

关键词: Specific absorption rate;    Magnetic nanoparticles;    Co-precipitation;    Peptization;    Ultra-sonication;    Tetramethylammonium hydroxide;    Magnetic fluid hyperthermia;    Optimization;   

DOI  :  10.1016/j.jmmm.2015.06.076

来源: Elsevier

【 摘 要 】

Magnetic Fluid Hyperthermia (MFH) uses heat generated by magnetic nanoparticles exposed to alternating magnetic fields to cause a temperature increase in tumors to the hyperthermia range (43-47 degrees C), inducing apoptotic cancer cell death. As with all cancer nanomedicines, one of the most significant challenges with MFH is achieving high nanoparticle accumulation at the tumor site This motivates development of synthesis strategies that maximize the rate of energy dissipation of iron oxide magnetic nanoparticles, preferable clue to their intrinsic biocompatibility. This has led to development of synthesis strategies that although attractive from the point of view of chemical elegance, may not be suitable for scale-up to quantities necessary for clinical use. On the other hand, to date the aqueous co-precipitation synthesis, which readily yields gram quantities of nanoparticles, has only been reported to yield sufficiently high specific absorption rates after laborious size selective fractionation. This work focuses on improvements to the aqueous co-precipitation of iron oxide nanoparticles to increase the specific absorption rate (SAR), by optimizing synthesis conditions and the subsequent peptization step. Heating efficiencies up to 1048 W/g(Fe) (36.5 kA/m, 341 kHz; ILP=2.3 nH m(2) kg(-1)) were obtained, which represent one of the highest values reported for iron oxide particles synthesized by co-precipitation without size selective fractionation. Furthermore, particles reached SAR values of up to 719 W/g(Fe) (36.5 kA/m, 341 kHz; ILP=1.6 nH m(2) kg(-1)) when in a solid matrix, demonstrating they were capable of significant rates of energy dissipation even when restricted from physical rotation. Reduction in energy dissipation rate due to immobilization has been identified as an obstacle to clinical translation of MFH. Hence, particles obtained with the conditions reported here have great potential for application in nanoscale thermal cancer therapy. (C) 2015 Elsevier B.V. All rights reserved.

【 授权许可】

Free