Optimizing lateral homogeneity of ion-induced surface modifications of non-planar dielectric polyethylene components employing ion fluence simulations and optical measurements of the sp2-dependent reflectivity

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS

卷:433

Article

Taiber, Jochen¹  Buchegger, Sascha¹  Stritzker, Bernd¹  Wixforth, Achim^1,2,3  Westerhausen, Christoph^1,2,3 

[1] Univ Augsburg, Expt Phys 1, D-86159 Augsburg, Germany

[2] Ludwig Maximilians Univ Munchen, Ctr NanoSci CeNS, D-80799 Munich, Germany

[3] ACIT, D-86159 Augsburg, Germany

关键词: Diamond-like carbon;    Plasma immersion ion implantation;    Surface modification;    Polyethylene;    Reflectivity;    Implant materials;   

DOI  :  10.1016/j.nimb.2018.07.034

来源: Elsevier

【 摘 要 】

An approach to enhance the durability of artificial joint replacements is to modify the surface of their polymeric bearing material to diamond-like carbon (DLC) by ion-induced polymer-to-DLC-transformation in a plasma immersion ion implantation process. Due to the dielectric character of the polymer and thus the impossibility of direct application of high voltage pulses to the component, this process requires an additional accelerator electrode above the surface. We here present two useful tools to optimize the geometry of such electrodes. First, we simulate the ions' trajectories for various electrode geometries and receive the resulting fluence distribution across the surface of the treated part. Second, we introduce a novel optical method to determine non-destructively the local ratio of sp(2) hybridized carbon atoms and thus the locally implanted fluence utilizing changes in reflectivity. Combining both tools, we here optimize, by way of example, the geometry of a grid electrode to obtain a homogeneous DLC-modification of a typical hip replacement inlay.

【 授权许可】

Free