Indium sulfide thin films as window layer in chemically deposited solar cells

THIN SOLID FILMS

卷:550

Article

Lugo-Loredo, S.¹  Pena-Mendez, Y.¹  Calixto-Rodriguez, M.²  Messina-Fernandez, S.³  Vazquez-Dimas, A.^1,4  Hernandez-Garcia, T.¹ 

[1] UANL, Fac Ciencias Quim, San Nicolas De Los Garza 66451, Nuevo Leon, Mexico

[2] Univ Tecnol Emiliano Zapata Estado Morelos, Emiliano Zapata 62760, Morelos, Mexico

[3] Univ Autonoma Nayarit, Tepic 63190, Nayarit, Mexico

[4] Univ Autonoma Estado Morelos, Ctr Invest Ingn & Ciencias Aplicadas, Cuernavaca 62209, Morelos, Mexico

关键词: Indium sulfide;    Chemical bath deposition;    Thin films;    Solar cells;   

DOI  :  10.1016/j.tsf.2013.10.115

来源: Elsevier

【 摘 要 】

Indium sulfide (In2S3) thin films have been synthesized by chemical bath deposition technique onto glass substrates using In(NO3)(3) as indium precursor and thioacetamide as sulfur source. X-ray diffraction studies have shown that the crystalline state of the as-prepared and the annealed films is beta-In2S3. Optical band gap values between 2.27 and 2.41 eV were obtained for these films. The In2S3 thin films are photosensitive with an electrical conductivity value in the range of 10(-3)-10(-7) (Omega cm)(-1), depending on the film preparation conditions. We have demonstrated that the In2S3 thin films obtained in this work are suitable candidates to be used as window layer in thin film solar cells. These films were integrated in SnO2:F/In2S3/Sb2S3/PbS/C-Ag solar cell structures, which showed an open circuit voltage of 630 mV and a short circuit current density of 0.6 mA/cm(2). (C) 2013 Elsevier B. V. All rights reserved.

【 授权许可】

Free