| SURFACE & COATINGS TECHNOLOGY | 卷:362 |
| Fine-tuning of chemical and physical polymer surface modifications by atmospheric pressure post-discharge plasma and its correlation with adhesion improvement | |
| Article | |
| Bres, Lucie1,2  Sanchot, Audrey1,2  Rives, Bertrand1  Gherardi, Nicolas2  Naude, Nicolas2  Aufray, Maelenn3  | |
| [1] IRT St Exupery, Toulouse, France | |
| [2] Univ Toulouse, CNRS, LAPLACE, Toulouse, France | |
| [3] Univ Toulouse, CIRIMAT, CNRS, INPT,UPS, 4 Allee Emile Monso,BP 44362, F-31030 Toulouse, France | |
| 关键词: Three-point bending test; Cross-cut test; Adhesion mechanisms; Atmospheric pressure plasma; PEEK matrix; | |
| DOI : 10.1016/j.surfcoat.2019.01.102 | |
| 来源: Elsevier | |
PDF
|
|
【 摘 要 】
Our study focuses on the use of a remote atmospheric pressure plasma process for the improvement of polymer surface reactivity. Indeed, surface activation of carbon-fiber-reinforced polymers that use a polyetheretherketone matrix is required to achieve strong and long-term adhesion of paint on the composite. Emphasis will be placed on the contribution of gas plasma used on surface modification. We use two techniques to characterize adherence improvement a qualitative and industrial approach with a cross-cut test and a quantitative approach with a three-point bending test. However, to provide a better understanding of the plasma-induced modifications using air or nitrogen gas, diagnostics of the surface are also necessary. The wettability improvement, chemical surface modifications, and topography are analyzed by using contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy, respectively. The combination of these diagnostics highlights the capability of plasma treatment to tune the plasma/surface interactions depending on gas plasma, which results in improved adhesion.
【 授权许可】
Free
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| 10_1016_j_surfcoat_2019_01_102.pdf | 2506KB |
PDF