Surface performances of Ti-6Al-4V substrates coated PVD multilayered films in biological environments

SURFACE & COATINGS TECHNOLOGY

卷:385

Article

Bahi, R.¹  Nouveau, C.²  Beliardouh, N. E.¹  Ramoul, C. E.^1,3  Meddah, S.³  Ghelloudj, O.³ 

[1] Univ BADJI Mokhtar UBMA, LIS, BP 12, Annaba 23000, Algeria

[2] HESAM Univ, Inst Technol, LaBoMaP, Arts & Metiers, Rue Porte Paris, F-71250 Cluny, France

[3] Res Ctr Ind Technol CRTI, POB 64, Algiers 16014, Algeria

关键词: PVD-coatings;    Oxides;    Nitrides;    Biomaterials;    Tribology;    Corrosion;   

DOI  :  10.1016/j.surfcoat.2020.125412

来源: Elsevier

【 摘 要 】

Multilayered and nanostructured coatings of Ti based alloys (oxides and nitrides) are elaborated and tested for increasing protective properties such as corrosion and wear resistances. A pin-on-disc tribometer was used to evaluate the wear resistance in Hank's solution against bovine bone. Corrosion behavior in Hank's solution was determined by potentiodynamic and electrochemical impedance spectroscopy techniques. Besides, the specimen surfaces were characterized by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) microanalyses. The results showed that optimal tribological properties were obtained in the case of coatings having TiN as top layer. The main wear mechanism was abrasive third body wear. In vitro corrosion tests at 37 degrees C showed that the better corrosion resistance was obtained when TiN was the top layer. However all of them exhibited good tribological properties, good corrosion resistance and then may be promising options for biomedical applications.

【 授权许可】

Free