Highly oxidation resistant and cost effective MCrAlY bond coats prepared by controlled atmosphere heat treatment

SURFACE & COATINGS TECHNOLOGY

卷:347

Article

Meng, Guo-Hui¹  Zhang, Bang-Yan¹  Liu, Hong¹  Yang, Guan-Jun¹  Xu, Tong¹  Li, Cheng-Xin¹  Li, Chang-Jiu¹ 

[1] Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Sch Mat Sci & Engn, Xian 710049, Shaanxi, Peoples R China

关键词: Thermal barrier coatings;    MCrAlY bond coat;    Air plasma spraying;    Thermally grown oxide;    Isothermal oxidation;    Controlled atmosphere heat treatment;   

DOI  :  10.1016/j.surfcoat.2018.04.068

来源: Elsevier

【 摘 要 】

MCrAlY bond coats with high oxidation resistance are essentially important for improving the life-time of thermal barrier coatings (TBCs). In this study, highly oxidation resistant MCrAlY bond coats were prepared by a cost-effective approach involving air plasma spraying (APS) followed by a controlled atmosphere heat treatment (a diffusion treatment performed in a furnace filled with Ar). The results confirmed that a pure alpha-Al2O3 thermally grown oxide (TGO) was successfully formed on the surface of the heat-treated APS bond coats during isothermal oxidation. The oxidation resistance of the resulting APS bond coats was as high as that of low-pressure plasma sprayed bond coats, which are very expensive. The high oxidation resistance of the APS bond coats fabricated in this study can be attributed to the structural changes of the interface between the splats inside the coating. During the controlled atmosphere heat treatment, the lamellar oxides present between the splats within the as-sprayed APS bond coats converted into isolated oxide particles, and the metal elements could diffuse freely within the coating after the healing of the interface between the lamellar splats. The effect of the changes in the interfacial microstructure of the bond coats on the growth of the TGO was discussed.

【 授权许可】

Free