Determination of free and total sulfur(IV) compounds in coconut water using high-resolution continuum source molecular absorption spectrometry in gas phase

TALANTA

卷:179

Article

Oliveira, Michael L.^1,2  Brandao, Geovani C.^2,3  de Andrade, Jailson B.^1,2  Ferreira, Sergio L. C.^1,2 

[1] Univ Fed Bahia, Inst Quim, Grp Pesquisa Quim & Quimiometria, Campus Ondina, BR-40170115 Salvador, BA, Brazil

[2] Univ Fed Bahia, INCT, Energia & Ambiente, BR-40170115 Salvador, BA, Brazil

[3] Univ Estado Bahia, Dept Ciencias Exatas & Terra, BR-41150000 Salvador, BA, Brazil

关键词: Sulfite;    Coconut water;    HR-CS MAS;    Gaseous analyte;    Multivariate optimization;   

DOI  :  10.1016/j.talanta.2017.11.070

来源: Elsevier

【 摘 要 】

This work proposes a method for the determination of free and total sulfur(IV) compounds in coconut water samples, using the high-resolution continuum source molecular absorption spectrometry. It is based on the measurement of the absorbance signal of the SO2 gas generate, which is resultant of the addition of hydrochloric acid solution on the sample containing the sulfating agent. The sulfite bound to the organic compounds is released by the addition of sodium hydroxide solution, before the generation of the SO2 gas. The optimization step was performed using multivariate methodology involving volume, concentration and flow rate of hydrochloric acid. This method was established by the sum of the absorbances obtained in the three lines of molecular absorption of the SO2 gas. This strategy allowed a procedure for the determination of sulfite with limits of detection and quantification of 0.36 and 1.21 mg L-1 (for a sample volume of 10 mL) and precision expressed as relative standard deviation of 5.4% and 6.4% for a coconut water sample containing 38.13 and 54.58 mg L-1 of free and total sulfite, respectively. The method was applied for analyzing five coconut water samples from Salvador city, Brazil. The average contents varied from 13.0 to 55.4 mg L-1 for free sulfite and from 24.7 to 66.9 mg L-1 for total sulfur(IV) compounds. The samples were also analyzed employing the Ripper's procedure, which is a reference method for the quantification of this additive. A statistical test at 95% confidence level demonstrated that there is no significant difference between the results obtained by the two methods.

【 授权许可】

Free