| REMOTE SENSING OF ENVIRONMENT | 卷:237 |
| A semi-empirical method for estimating complete surface temperature from radiometric surface temperature, a study in Hong Kong city | |
| Article | |
| Yang, Jinxin1  Wong, Man Sing2  Ho, Hung Chak2,3  Krayenhoff, E. Scott4  Chan, P. W.5  Abbas, Sawaid2  Menenti, Massimo6,7  | |
| [1] Guangzhou Univ, Sch Geog Sci, Guangzhou 510275, Peoples R China | |
| [2] Hong Kong Polytech Univ, Dept Land Surveying & Geoinformat, Kowloon, Hong Kong, Peoples R China | |
| [3] Univ Hong Kong, Dept Urban Planning & Design, Hong Kong, Peoples R China | |
| [4] Univ Guelph, Sch Environm Sci, Guelph, ON, Canada | |
| [5] Hong Kong Observ, Hong Kong, Peoples R China | |
| [6] Delft Univ Technol, Fac Civil Engn & Earth Sci, POB 5048, NL-2600 GA Delft, Netherlands | |
| [7] Chinese Acad Sci, Inst Remote Sensing & Digital Earth, State Key Lab Remote Sensing Sci, Beijing 100101, Peoples R China | |
| 关键词: Remote sensing; Surface temperature; Thermal heterogeneity; Urban geometry; | |
| DOI : 10.1016/j.rse.2019.111540 | |
| 来源: Elsevier | |
PDF
|
|
【 摘 要 】
The complete surface temperature (T,) in urban areas, defined as the mean temperature of the total active surface area, is an important variable in urban micro-climate research, specifically for assessment of the urban surface energy balance. Since most vertically-oriented building facets are not observed by a nadir-viewing remote imaging radiometer, the radiometric surface temperature (T-r) measured at a specific view angle cannot be used with existing heat transfer equations to estimate radiative and convective fluxes in the urban environment. Thus, it is necessary to derive T-c for city neighborhoods. This study develops a simple method to estimate T-c from T-r with the aid of the Temperatures of Urban Facets in 3D (TUF-3D) numerical model, which calculates 3-D sub-facet scale urban surface temperatures for a variety of surface geometries and properties, weather conditions and solar angles. The effects of geometric and meteorological characteristics - e.g., building planar area index (lambda(p)), wall facet area index (F), solar irradiance - on the difference between T-c and T-r were evaluated using the TUF-3D model. Results showed the effects of geometric and meteorological characteristics on the difference between T, and T-r differ between daytime and nighttime. The study then sought to predict the relationship between T-r and T-c, using lambda(p), F, and solar irradiance for daytime and only using lambda(p), and F for nighttime. Based on the simulated data from TUF-3D, the resulting relationships achieve a coefficient of determination (r(2)) of 0.97 and a RMSE of 1.5 K during daytime, with corresponding nighttime values of r(2) = 0.98 and RMSE = 0.69 K. The relationships between T-r and T-c are evaluated using high resolution airborne thermal images of daytime urban scenes: r(2) = 0.75 and RMSE = 1.09 K on August 6, 2013 at 12:40 pm; and r(2) = 0.86 and RMSE = 1.86K on October 24, 2017 at 11:30 am. The new relationships were also applied to estimate T-c from T-r in Hong Kong retrieved from Landsat 5 Thematic Mapper (TM) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). In the present climatic context, the difference between T-c and T-r can reach 10 K during daytime in summer, and 6 K during daytime in winter, with seasonal variation attributable to the variations in shortwave irradiance. The nighttime difference between T-c, and T-r can also reach 2 K in both summer and spring seasons.
【 授权许可】
Free
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| 10_1016_j_rse_2019_111540.pdf | 7843KB |
PDF