Enhanced dispersion and properties of a two-component epoxy nanocomposite using surface modified cellulose nanocrystals

POLYMER

卷:112

Article

Peng, Shane X.¹  Shrestha, Shikha¹  Yoo, Youngman¹  Youngblood, Jeffrey P.¹ 

[1] Purdue Univ, Sch Mat Engn, W Lafayette, IN 47907 USA

关键词: Nanocomposite;    Cellulose nanocrystals;    Epoxy;    Surface modification;    Mechanical properties;   

DOI  :  10.1016/j.polymer.2017.02.016

来源: Elsevier

【 摘 要 】

Epoxy nanocomposites reinforced with acetyl, hexanoyl, and dodecanoyl surface modified Cellulose Nanocrystals (CNC) were fabricated. Surface modified CNCs were dispersed in epoxy resin with a co-solvent. After complete removal of the co-solvent, a typical two component epoxy system was achieved where hardener was then added to cure the resin. Acetyl grafted CNC (CNC_a) and hexanoyl grafted CNC (CNC_h) both had good dispersion in cured epoxy as observed visually and through electron microscopy. Tensile modulus, tensile strength, and work of fracture of epoxy were improved with the addition of CNC_a and CNC_h. CNC_a reinforced epoxy had the highest increases in mechanical properties. Dodecanoyl grafted CNC (CNC_d) led to aggregation in the epoxy which led to insignificant changes in mechanical properties. The addition of CNC_a increased glass transition temperature (T-g) of epoxy while CNC_h and CNC_d led to T-g depression. (C) 2017 Elsevier Ltd. All rights reserved.

【 授权许可】

Free