Densification and characterization of SiC-AlN composites for solar energy applications

RENEWABLE ENERGY

卷:129

Article

Besisa, Dina H. A.^1,3  Ewais, Emad M. M.¹  Ahmed, Yasser M. Z.¹  Elhosiny, Fouad, I²  Kuznetsov, Denis, V³  Fend, Thomas⁴ 

[1] CMRDI, RCMD, POB 87 Helwan, Cairo 11421, Egypt

[2] Ain Shams Univ, Fac Sci, Chem Dept, Cairo, Egypt

[3] Natl Univ Sci & Technol MISiS, Funct Nanosyst & High Temp Mat Dept, Leninskiy Pr 4, Moscow 119049, Russia

[4] German Aerosp Ctr Linder Hohe, D-51147 Cologne, Germany

关键词: Solar energy;    Volumetric solar receiver;    SiC/AlN composites;    Physical properties;    Microstructure;    Thermal properties;   

DOI  :  10.1016/j.renene.2018.05.100

来源: Elsevier

【 摘 要 】

In an attempt to solve one of the most critical global concerns of energy resources depletion, the present work is focused on tailoring and processing of a new volumetric receiver material for solar energy and high temperature applications. This in turn support producing a highly qualified solar receiver material for the future energy and electricity supply of Middle East and Europe. Herein, the processing and studying of the different parameters affecting on the preparation of near fully dense SiC/AlN structures and investigation of their different characteristics were achieved, These ceramic composites will constitute the final foam struts of the pores of the volumetric air receiver. Various SiC/AlN composites were designed with different ratio of AlN content (0-40%) and produced via pressureless sintering. Influence of different parameters on sintering and densification of SiC/AlN composites such as sintering atmosphere, additives and temperature were investigated in order to achieve the required and qualified properties of the final product of proposed SiC/AlN solar receiver. The quality and performance of the produced composites were evaluated and analyzed through different investigations, including XRD, densification parameters, microstructure examination and thermal properties. The results show that the best sintering conditions for producing a highly dense and qualified carbide/nitride receiver was attained at a temperature of 2080 degrees C in argon/vacuum with 2.5%Y + A addition. The characteristics of the investigated composites were mainly dependent on their densification behavior and AlN content. Thermal conductivity, diffusivity and coefficient of thermal expansion gave enhanced values at high temperatures. The inspected SiC/AlN composites can be strongly nominated to be used in solar energy applications. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free