Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:674

Article

Wang, Zhuqing¹  Stoica, Alexandru D.²  Ma, Dong²  Beese, Allison M.¹ 

[1] Penn State Univ, Dept Mat Sci & Engn, University Pk, PA 16802 USA

[2] Oak Ridge Natl Lab, Chem & Engn Mat Div, Neutron Sci Directorate, Oak Ridge, TN 37831 USA

关键词: Diffraction elastic constants;    Single-crystal elastic constants;    Inconel 625;    Neutron diffraction;    Superalloys;    Additive manufacturing;   

DOI  :  10.1016/j.msea.2016.08.010

来源: Elsevier

【 摘 要 】

In this work, diffraction and single-crystal elastic constants of Inconel 625 have been determined by means of in situ loading at room and elevated temperatures using time-of-flight neutron diffraction. Theoretical models proposed by Voigt, Reuss, and Kroner were used to determine single-crystal elastic constants from measured diffraction elastic constants, with the Kroner model having the best ability to capture experimental data. The magnitude of single-crystal elastic moduli, computed from single-crystal elastic constants, decreases and the single crystal anisotropy increases as temperature increases, indicating the importance of texture in affecting macroscopic stress at elevated temperatures. The experimental data reported here are of great importance in understanding additive manufacturing of metallic components as: diffraction elastic constants are required for computing residual stresses from residual lattice strains measured using neutron diffraction, which can be used to validate thermomechanical models of additive manufacturing, while single-crystal elastic constants can be used in crystal plasticity modeling, for example, to understand mechanical deformation behavior of additively manufactured components. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free